Splay Main Unit; Display Main Unit - Ventus W140 User Manual

DISPLAY MAIN UNIT

DISPLAY MAIN UNIT
Stand and Batteries Installation Stand and Batteries Installation
The unit is designed for desktop or wall mount for easy viewing. The unit is designed for desktop or wall mount for easy viewing.
1. Remove the battery door of the main unit. 1. Remove the battery door of the main unit.
2. Insert 2 new AA size batteries according to the " +/- " polarity mark on the battery compartment. 2. Insert 2 new AA size batteries according to the " +/- " polarity mark on the battery compartme
3. Replace the battery door. 3. Replace the battery door.
5. Press the [ SCAN ] 5. Press the [ SCAN ]
6 . Press the [ RESET ] button at the bottom of the sensor. After successful linking with the sensor, 6 . Press the [ RESET ] button at the bottom of the sensor. After successful linking with the senso
NOTE: NOTE:
1. If no display appears on the LCD after inserting the batteries, press the [ RESET ] button by 1. If no display appears on the LCD after inserting the batteries, press the [ RESET ] button by
using a pointed object. using a pointed object.
2. In some cases, you may not receive the RC signal immediately due to the atmospheric 2. In some cases, you may not receive the RC signal immediately due to the atmospheric
disturbance. disturbance.
Pairing of Wireless Sensor with Display Main Unit Pairing of Wireless Sensor with Display Main Unit
After insertion of batteries, the Display Main Unit will automatically search and connect the wireless After insertion of batteries, the Display Main Unit will automatically search and connect the wirele
rainfall will appear on the display. rainfall will appear on the display.
Changing Batteries of Thermo-Rain Gauge Sensor Changing Batteries of Thermo-Rain Gauge Sensor
Whenever you changed the batteries of the wireless sensor, pairing must be done manually. Whenever you changed the batteries of the wireless sensor, pairing must be done manually.
1. Change the batteries to new ones. 1. Change the batteries to new ones.
2. Press the [ RESET ] button on the sensor. 2. Press the [ RESET ] button on the sensor.
Press the [ SCAN ] button on the Display Main Unit. Press the [ SCAN ] button on the Display Main Unit.
3. 3.
NOTE: NOTE:
Pressing [ RESET ] button at bottom of the wireless sensor will generate a new code for Pressing [ RESET ] button at bottom of the wireless sensor will generate a new code for
1. 1.
pairing purpose. pairing purpose.
2. Always dispose old batteries in an environmental safe manner. 2. Always dispose old batteries in an environmental safe manner.
7 7