pRails
W ith good care and cleaning, your appliance will retain
R a i l s
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
Push the front rail forwards and up
1.
(fig.
).
!
Then move the whole rail slightly to the rear
2.
remove it
(fig.
).
ƒ
"
Clean the rails with
cleaning agent and a sponge. For stubborn deposits of
dirt, use a brush.
Inserting the holders
If the holders fall out when you remove the rails, these
must be re-inserted.
The holders at the front differ from those at the rear
1.
(fig.
).
!
Use the hook to mount the front holder at the top
2.
into the round hole
‚
it at the bottom, and straighten it
and detach it
‚
, set it at a slight incline, attach
(fig.
).
ƒ
"
Use the hook to attach the rear holder into the upper
3.
hole
‚
Attaching the rails
When hanging the rails, ensure that the sloping edge is
at the top of the rail (see figure).
ƒ
and
‚
The rails fit both the left and right sides.
Mount the rear of the frame at the top and bottom
1.
and pull it forwards
Then insert it at the front
2.
(fig.
"
and push it into the lower hole
ƒ
(fig.
).
!
and push it downwards
‚
).
Rails
en
(fig.
).
ƒ
#
‚
ƒ
23