KOMFI-RIDER Phoenix User Manual page 19

10.2 Charging Your Batteries
• Make sure you read and understand the battery charger user manual, if supplied, as
well as the safety notes on the charger.
• Turn off the scooter power and remove the key.
• Slide away the battery charger socket cover (Fig 10.2.1.)
FIG 10.2.1
• Put the charger plug into the outlet point.
• Do not switch on the battery charger until all the plugs are in position.
• The LED light on the battery charger will show amber while charging.
• The LED light on the battery charger will show green when batteries are fully charged.
• Turn off the mains power to the charger before removing the charger plug from charg-
ing outlet.
WARNING! Risk of explosion and electric shock if batteries are charged when
incorrectly wired. Never attempt to disconnect or reconnect the batteries. If the
batteries do not appear to be working correctly, contact your authorized provider.
WARNING! Risk of explosion and destruction of batteries if the wrong battery
charger is used. Only every use the battery charger supplied with your vehicle, or
a charger that has been approved by Komfi-Rider.
WARNING! Never attempt to open or disassemble the charger. If the battery
charger does not appear to be working correctly, contact your authorized provid-
er.
WARNING! Risk of electric shock and damage to the battery charger if it gets wet.
Always protect the battery charger from water and always charge in a dry envi-
ronment.
WARNING! Risk of short circuit and electric shock if the battery charger has been
damaged. Never use the charger if it has been dropped or damaged.
WARNING! Risk of electric shock and damage to the batteries – Never attempt to
recharge the batteries by attaching cables directly to the battery terminals.
KOMFI-RIDER 19