Table of Contents
Advertisement
3.1 Beam-on-Floor
Beam-on-Floor is a light displayed on the
floor below the appliance door.
• When the programme starts, a red light
comes on and stays on for the duration of
the programme.
• When the programme is completed, a
green light comes on.
• When the appliance has a malfunction, the
red light flashes.
Beam-on-Floor is off when the appliance
is deactivated.
4. CONTROL PANEL
On/off button
1
Display
2
Programme selection button
3
AUTO programme button
4
Delay button
5
4.1 Indicators
Indicator
Description
Salt indicator. It is on when the salt container needs refilling. It is always off while the pro‐
gramme operates.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. It is always off while
the programme operates.
5. PROGRAMMES
The numbering of the programmes in the table (P1, P2, etc.) reflects their sequence on the
control panel.
The order of the programmes in the table may not reflect their sequence on the control panel.
When AirDry is activated during the
drying phase, the projection on the floor
may not be completely visible. To see if
the cycle is finished, check the control
panel.
1
2
6
7
8
9
4
5
6
3
Spray Zone button
Extra Power button
Glass Care button
Indicators
7
8
9
ENGLISH
7
Advertisement
Table of Contents
