14. ENVIRONMENTAL CONCERNS..............26 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
(average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 15 place settings.
Page 5
ENGLISH • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. •...
ENGLISH 4. CONTROL PANEL On/off button Option touch button Program touch button Indicators Programme indicators Start touch button Display Delay touch button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is al‐ ways off while the programme operates.
5. PROGRAMMES The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher Degree of Programme phases Options load soil Crockery, Normal, • Prewash • ExtraPower cutlery, pots, lightly • Dishwashing 50 °C •...
Page 9
ENGLISH Programme Dishwasher Degree of Programme phases Options load soil • Prewash 1) This programme offers the most efficient use of water and energy consumption for crock‐ ery and cutlery with normal soil. This is the standard programme for test institutes. This pro‐ gramme is used to assess compliance with the Ecodesign Comission Regulation (EU) 2019/2022.
6. OPTIONS The display shows the updated Desired options must be programme duration. activated every time before you start a programme. 6.2 ExtraPower It is not possible to activate or deactivate options while a This option improves the dishwashing programme is running.
Page 11
ENGLISH • Activation or deactivation of the To enter user mode, press and hold AirDry. simultaneously until the As the appliance stores the saved indicators settings, there is no need to configure flash and the display is blank. it before every cycle. 7.2 The water softener How to set the programme The water softener removes minerals...
Page 12
Multi-tabs containing salt are programme by additional 2 Wh. The not effective enough to rinsing of the softener ends with a soften hard water. complete drain. Regeneration process Each performed softener rinse (possible...
ENGLISH refill rinse aid. If the drying results are AirDry is automatically activated with all satisfactory while using multi-tablets only, programmes other than you can deactivate the dispenser and the applicable). indicator. However, for the best drying The duration of the drying phase and the performance, always use rinse aid and door opening time vary depending on the keep the rinse aid indicator active.
5 minutes. The CAUTION! washing phase starts only after this Water and salt can come out procedure is complete. The procedure is of the salt container when repeated periodically. you fill it. After you fill the 8.1 The salt container...
Page 15
ENGLISH Make sure that the appliance is in The upper ends of the two programme selection mode. vertical ribs inside the • If the salt indicator is on, fill the compartment (B) indicate salt container. the maximum level for filling •...
Make sure that there is detergent in the programme duration. After closing the detergent dispenser before you start a door, the appliance continues from the new programme. point of interruption. End of the programme...
Page 17
ENGLISH – Refill the salt container whenever 1. Set the highest level of the water necessary. softener. – Use the recommended dosage of 2. Make sure that the salt and rinse aid the detergent and rinse aid. containers are full. –...
• The programme is suitable to the type 2. First remove items from the lower of load and the degree of soil. basket, then from the upper basket. • The correct quantity of detergent is After the programme is used.
Page 19
ENGLISH 1. Turn the filter (B) counterclockwise and remove it. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3.
Page 20
2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 3.
ENGLISH 11.7 Cleaning the ceiling spray 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the We recommend to clean the ceiling spray delivery tube (A), turn the mounting arm regularly to prevent soil from element (B) counterclockwise and clogging the holes.
Page 22
Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
Page 23
ENGLISH Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
Page 24
Refer to "Before first use", WARNING! "Daily use", or "Hints and We do not recommend using tips" for other possible the appliance until the causes. problem has been completely fixed. Unplug the Once you have checked the appliance, appliance and do not plug it deactivate and activate the appliance.
ENGLISH Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for wash‐ ing. Refer to "The water softener". • Silver and stainless steel cutlery were placed to‐ gether. Do not place silver and stainless steel items close together.
Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 - 60 Water supply pressure bar (minimum and maximum) 0.5 - 10 MPa (minimum and maximum) 0.05 - 1.0 Water supply max 60 °C Cold water or hot water...
Need help?
Do you have a question about the ESZ89400UX and is the answer not in the manual?
Questions and answers