Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Electrolux ESG89310UW
Summary of Contents for Electrolux ESG89310UW
- Page 1 ESG89310UW ESG89310UX Dishwasher User Manual...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............28 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 4: Safety Instructions
(average) domestic usage levels. Do not change the specification of this appliance. • The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 15 place settings. - Page 5 ENGLISH • Warning: this appliance is designed to be installed / connected to a grounding connection in the building. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. •...
-
Page 6: Product Description
2.6 Service has been discontinued: door hinge and seals, other seals, spray arms, • To repair the appliance contact the drain filters, interior racks and plastic Authorised Service Centre. Use peripherals such as baskets and lids. original spare parts only. -
Page 7: Control Panel
ENGLISH Lower spray arm Detergent dispenser Filters Lower basket Rating plate Upper basket Salt container Cutlery drawer Air vent Rinse aid dispenser 3.1 TimeBeam When AirDry is activated during the drying phase, the TimeBeam displays the following projection on the floor may information on the floor below the not be completely visible. -
Page 8: Programmes
4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. It is al‐ ways off while the programme operates. Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐ ing. It is always off while the programme operates. - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil None Cleaning • Cleaning 70 °C Machine the appli‐ • Intermediate rinse ance interi‐ • Final rinse Care • AirDry Crockery, • Prewash cutlery, pots, • Dishwashing 50 - 60 pans °C •...
-
Page 10: Settings
Water (l) Energy (kWh) Duration (min) 1)2) Programme 12.2 1.140 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. - Page 11 ENGLISH advise you on the hardness of the water water softener to assure good washing in your area. Set the right level of the results. Water hardness German de‐ French de‐ mmol/l mg/l (ppm) Clarke Water soften‐ grees (°dH) grees (°fH) degrees er level 47 - 50...
- Page 12 6.3 The rinse aid empty the total duration of a programme by additional 5 minutes. notification Subsequently, the rinsing of the water The rinse aid helps to dry the dishes softener that lasts 5 minutes may begin without streaks and stains. It is...
- Page 13 ENGLISH 1. Press • The indicators • The indicators are off. are off. • The indicator still flashes. • The display shows the current • The indicator still flashes. setting. • The display shows the current – = TimeBeam is activated. setting: e.g.
-
Page 14: Options
• The indicators CAUTION! If children have access to are off. the appliance, we advise to • The indicator still flashes. deactivate AirDry. The • The display shows the current automatic opening of the setting. door may pose a danger. -
Page 15: Before First Use
ENGLISH 8. BEFORE FIRST USE 1. Make sure that the current level of 5. Remove the salt around the opening the water softener agrees with the of the salt container. hardness of the water supply. If not, adjust the level of the water softener. -
Page 16: Daily Use
2. Fill the dispenser (B) until the rinse Fill the rinse aid dispenser aid reaches the marking ''MAX''. when the indicator (A) is 3. Remove the spilled rinse aid with an clear. absorbent cloth to prevent excessive foam formation. - Page 17 ENGLISH appliance is in programme selection Press and hold simultaneously mode. until the appliance is 3. Press in programme selection mode. • The related indicator is on. • The display shows the Cancelling the programme programme number for approximately 3 seconds and Press and hold simultaneously then shows the programme until the appliance is...
-
Page 18: Hints And Tips
10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. -
Page 19: Care And Cleaning
ENGLISH 4. When the programme is complete, • Make sure that the spray arms can adjust the water softener according move freely before you start a to the water hardness in your area. programme. 5. Adjust the released quantity of rinse 10.5 Before starting a aid. - Page 20 11.2 Removal of foreign objects Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump.
- Page 21 ENGLISH 2. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil (A). Turn it clockwise until it locks. from the holes.
- Page 22 11.7 Cleaning the ceiling spray 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
-
Page 23: Troubleshooting
ENGLISH 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers. - Page 24 Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the interior filter system is not clog‐ The display shows i20.
- Page 25 ENGLISH Problem and alarm code Possible cause and solution The remaining time in the • This is not a defect. The appliance is working cor‐ display increases and rectly. skips nearly to the end of the programme duration. Small leak from the appli‐ •...
- Page 26 12.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the Extra Power option to improve the washing results of a selected programme.
-
Page 27: Technical Information
ENGLISH Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the • The level of salt is low, check the refill indicator. tableware, on the tub and on •... -
Page 28: Environmental Concerns
13.1 Link to the EU EPREL EPREL database using the link https:// eprel.ec.europa.eu and the model name database and product number that you can find on the rating plate of the appliance. Refer to The QR code on the energy label the chapter "Product description". - Page 32 www.electrolux.com/shop...