Advertisement
Quick Links
thermOweld
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - BAR TO RAIL
BX-1
Follow procedures on back of
this sheet for preparation of rail
and bar. Position end of bar to
center of tap hole. Follow welding
procedures on the back of this
sheet.
BX-7
Follow procedures on back of this sheet for preparation
of rail and bar. Position end of bar to center of tap hole.
Follow welding procedures on the back of this sheet.
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
®
The Contractors Choice
BX-2
Follow procedures on back of this sheet for preparation
of rail and bar. Position mold and lug onto rail as shown.
Be sure to butt end of lug against rail foot. Lock bottom
plate to upper half of mold using frame provided. Follow
welding procedures on the back of this sheet.
BX-13
Follow procedures on back of this sheet for preparation
of rail and bar. Position end of bar to center of tap hole.
Follow welding procedures on the back of this sheet.
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
ECN 2552 REV "G" 03/06/13
34-5381-70
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Burndy Continental Industries thermOweld BX-1
Summary of Contents for Burndy Continental Industries thermOweld BX-1
- Page 1 thermOweld ® The Contractors Choice INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - BAR TO RAIL BX-1 BX-2 Follow procedures on back of Follow procedures on back of this sheet for preparation this sheet for preparation of rail of rail and bar. Position mold and lug onto rail as shown. and bar.
- Page 2 GENERAL SAFETY INSTRUCTIONS WELDING PROCEDURE 1. Always wear proper clothing, safety glasses and gloves when 1. Check mold tag for material to be welded and proper cartridge exothermic welding. size to use. 2. Only weld items mold is designed for. 2.
Need help?
Do you have a question about the Continental Industries thermOweld BX-1 and is the answer not in the manual?
Questions and answers