Advertisement
Quick Links
thermOweld
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - BAR TO GROUND ROD
BR-9
Insert end of ground rod
even with upper edge of
bus bar.
Pack ground
rod opening with packing
material when run bus is
3" or wider.
BR-99 for M-3729
Place ground rod and bus
bar into mold as shown.
BR-99 for M-3776
Place ground rod and bus
bar into mold as shown.
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
®
The Contractors Choice
BR-25
Insert ground rod and bus
bar as shown. Gap bars
1/8" under center of tap
hole.
BR-3
Place ground rod and bus bars into
mold as shown.
BR-29
Place end of bar under center of
tap hole. With mold closed, insert
ground plate.
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
ECN 2552 REV "L" 03/06/13
34-5381-85
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Burndy Continental Industries ThermOweld BR-9
Summary of Contents for Burndy Continental Industries ThermOweld BR-9
- Page 1 thermOweld ® The Contractors Choice INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - BAR TO GROUND ROD BR-9 BR-25 Insert end of ground rod Insert ground rod and bus even with upper edge of bar as shown. Gap bars bus bar. Pack ground 1/8"...
- Page 2 GENERAL SAFETY INSTRUCTIONS WELDING PROCEDURE 1. Always wear proper clothing, safety glasses and gloves when 1. Check mold tag for material to be welded and proper cartridge exothermic welding. size to use. 2. Only weld items mold is designed for. 2.
Need help?
Do you have a question about the Continental Industries ThermOweld BR-9 and is the answer not in the manual?
Questions and answers