Cleaning the pump Checking the water inlet hose Precautions and tips, 17 General safety Disposal Opening the porthole door manually RPG 945 J Description of the washing machine, 18-19 Control panel Display Running a wash cycle, 20 Wash cycles and options, 21...
+7(495) 215-14-41 Ремонт стиральных машин Installation https://rembitteh.ru +7 (903) 722-17-03 Levelling the machine correctly will provide ! This instruction manual should be kept in a safe it with stability, help to avoid vibrations and place for future reference. If the washing machine is sold, transferred or moved, make sure that the excessive noise and prevent it from shifting while it is operating.
Technical data ! We advise against the use of hose RPG 945 J Model extensions; if it is absolutely necessary, the width 59.5 cm extension must have the same diameter as the height 85 cm...
+7(495) 215-14-41 Ремонт стиральных машин Care and maintenance https://rembitteh.ru +7 (903) 722-17-03 Cutting off the water and Caring for the door and drum of electricity supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system to prevent unpleasant odours from forming. inside the washing machine and help to Cleaning the pump prevent leaks.
+7(495) 215-14-41 Ремонт стиральных машин Precautions and tips https://rembitteh.ru +7 (903) 722-17-03 Opening the porthole door manually This washing machine was designed and constructed in accordance with international safety regulations. The In the event that it is not possible to open the porthole following information is provided for safety reasons and door due to a powercut, and if you wish to remove the must therefore be read carefully.
+7(495) 215-14-41 Ремонт стиральных машин Description of the washing https://rembitteh.ru +7 (903) 722-17-03 machine DIRECT Control panel INJECTION TEMPERATURE button and OPTION indicator light button buttons and indicator lights ON/OFF button DISPLAY START/PAUSE CHILD Programme button and indicator SPIN LOCK Detergent dispenser drawer light button...
Page 7
+7(495) 215-14-41 Ремонт стиральных машин https://rembitteh.ru +7 (903) 722-17-03 Display The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear in section A (the display will show the maximum duration of the cycle chosen, which may decrease after several minutes, since the effective duration of the programme varies depending on the wash load and the settings chosen);...
+7(495) 215-14-41 Ремонт стиральных машин Running a wash cycle https://rembitteh.ru +7 (903) 722-17-03 be activated; the indicator light for the option which has 1. SWITCH THE MACHINE ON. Press the button; been activated will be illuminated. the START/PAUSE indicator light will flash slowly in a ! The options may affect the recommended load value green colour.
+7(495) 215-14-41 Ремонт стиральных машин Detergents and laundry https://rembitteh.ru +7 (903) 722-17-03 Detergent dispenser drawer Wool - Woolmark Apparel Care - Green: the wool wash cycle of this machine has been approved Successful washing results also depend on the correct by The Woolmark Company for the washing of wool dose of detergent: adding too much detergent will not garments labelled as “hand wash”...
+7(495) 215-14-41 Ремонт стиральных машин Troubleshooting https://rembitteh.ru +7 (903) 722-17-03 Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The washing machine does not...
+7(495) 215-14-41 Ремонт стиральных машин Service https://rembitteh.ru +7 (903) 722-17-03 195134143.00 04/2015 - Xerox Fabriano Before contacting the Technical Assistance Service: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the wash cycle to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre. Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem;...