Handling The Sd Memory Card - Toshiba PDR-2300 Owner's Manual

Handling the SD Memory Card

When you use the SD memory card(sold separately), strictly observe the Safety
Precautions on page 4 and the notes described below.
● Cautions
The SD memory card includes a non-volatile semiconductor memory (NAND Flash EEP-ROM).
Under normal use, data saved in the SD memory card is not damaged or lost. If used improperly,
however, the data may be damaged or lost. Please be aware that Toshiba Corporation will accept no
responsibility whatsoever for damaged or lost data, regardless of the type or cause of the problem or
damage.
The SD memory card uses part of the memory as its system area. The actually usable memory capacity
is therefore lower than the indicated capacity.
The supplied SD memory card has been already formatted for image storage. Always use this camera
when reformatting the card to erase images or folders. Formatting the SD memory card on other devices
(PC, etc.) may result in problems such as inability to read or write data.
We strongly recommend that you make backups of important data.
When the SD memory card comes to the end of its life, it does not allow image data to be written or
deleted. If this happens, purchase a new SD memory card.
● Write Protection
To prevent valuable data from being erased accidentally, switch the write protect tab at the side of the SD
memory card to "LOCK." To save, edit, or erase data in the card, cancel the write protection state.
Write protection
tab
22
LOCK LOCK
Write protection
state
™