Using The Ac Power Adapter - Toshiba PDR-2300 Owner's Manual

Using the AC Power Adapter

Open the jack cover and connect one end of the AC
power adapter to the DC IN jack on the camera.
Connect the other end to an electrical outlet.
IMPORTANT
• When the image is being recorded to the SD memory card or the internal memory, the LED 1 is blinking
orange. Do not disconnect the AC power adapter from the camera during this process.
NOTE
• Make sure to use only the specified AC power adapter (5V/3A) for the camera. Otherwise, it may cause
damages to the camera, which is not covered under the warranty.
35