Advertisement
Parts Legend:
Cap
1.
2. Escutcheon
3. Top
Mounting
Nut
4. Body
5. Bottom
Mounting
Nut
6. Outlet
7. Inlet
Connecting the Air Gap:
Parts Legend from Four- Stage Reverse Osmosis System-INS12980:
A- Manifold
B- Sediment Filter
C- Pre-Carbon Filter
D- Reverse Osmosis Filter
E- Post Carbon Filter
F-Manifold Screws
G- Tank Elbow
H- Cold Water Tee
I-1/4" Black Inlet Tube
J- 1/4" Blue Air Gap Tube
Installing the Air Gap:
1. Disassemble the Air Gap: Unthread the cap (1),
the escutcheon (2), and the top mounting nut
(3).
2. From under the sink: Slide the body (4) up
through the hole in the deck.
3. From above the sink: Thread the top mounting
nut (3) onto the body (4), leaving about 1/4"
(6mm) of the threads above the sink. Under the
sink, tighten the bottom mounting nut (5).
4. Thread the escutcheon (2) and cap (1) over the
top of the body (4).
K- 3/8" Blue Air Gap Tube
L- 3/8" White Tank Tube
M- 3/8" Gray Outlet Tube
N-Sealant Tape
O- Saddle Screws and Nut
https://solutions.moen.com/Article_Library/How_to_Install_an_Air_Gap
P- Foam Seal
Q- Drain Saddle
R- Tank
Updated: Wed, 13 Dec 2023 21:55:43 GMT
Powered by
2
Advertisement
