Advertisement
Installing the Saddle:
1. Punch out the center hole on the Foam Seal (P)
and use it as a template to locate the drilling
position above the sink trap. Mark the location with
a pencil.
2. At the pencil mark location, drill a 1/4" (32mm) hole
through the wall of the drain pipe. Note: Do not
drill through both sides of the pipe.
3. Align the holes on the plate of the Drain Saddle and
the Foam Seal (P). Remove the film from the Foam
Seal (P), and attach it to the inside of the plate of
the Drain Saddle.
4. Aligning with the drip hole, position the Saddle (Q)
on the drain tailpiece and securely using the
Screws and Nuts (O) provided.
https://solutions.moen.com/Article_Library/How_to_Install_an_Air_Gap
Updated: Wed, 13 Dec 2023 21:55:43 GMT
Powered by
3
Advertisement
