Linear Logic ScanGauge III Quick Start Manual page 6

Helpful Hints
• When filling the tank on your second fill up, • Once you have completed your second
fill up, subsequent fill ups may not require
adjusting the gallons/liters before pressing
DONE.
I
try to use the same pump you used for your
first fill up with the vehicle pointed in the
same direction. If you fill up your fuel tank
with your vehicle on an incline, it can have
an effect on the amount of fuel the pump
can dispense into your tank.
• When filling your tank, let the pump shut off
automatically. Do not top off.
Step 2 - Your Second Fill Up and Subsequent Fill-ups
............................................................................................................................................................................
From The Home Screen
,d:
-o--
a.•
---0-
TRIP MORE
$
i!
SETIJP FILL IJP
FILL UP
?
Fuel Added
0.00
2 3 4 5 6 7 8 9 0
FULL
SAVE
Once you have set the fuel
cost, press SAVE.
I
1) When the tank is around 1/4 full ,
fill up your
tank again. Be sure to let the pump shut off
automatically
2) Use the FILL UP function to tell ScanGauge
you have filled the tank or entered the amount
of gallons for a partial fill up. From the Home
Screen, follow the sequence shown to the left.
3) Use the Fuel Cost tab to enter the price per
gallon to keep track of your fuel cost as you
drive in the gauge screen and trip menu.
4) Press SAVE when finished