Linear Logic ScanGauge III Quick Start Manual page 5

4) Calibrating Your ScanGauge
The accuracy of your ScanGauge can be improved
by calibrating the fuel consumption . Calibrating your
ScanGauge to accurately report fuel consumption is a
2-step process; Your
First Fill Up, Your Second Fill Up.
After following the initial calibration
procedure, you should follow Step 2
for each subsequent fill up.
If you miss a full up procedure after
filling your tank, start with Step 1 of
the calibration process on your next
fill up to maintain accuracy .
From The Home Screen
1) Fill up the tank, letting the pump shut off
automatically.
,d:
-o--
Q\.;
--0-
2) Use the FILL UP function to tell ScanGauge
you have filled the tank. From the Home
Screen, follow the sequence shown to the
right.
3) On your first fill-up, DO NOT make any
adjustments to the indicated fuel. Simply
press SAVE.
4) Next, press the Fuel Cost tab. Enter the
cost per gallon/liter and press SAVE.
5) Keep the ScanGauge connected to your
vehicle and use the vehicle normally.
6) Once you reach approximately 1/4 tank of
fuel left, follow the directions in Step 2.
~
TRIP MORE
$
i)
SETUP FILL UP
FILL UP
?
Fuel Added
o_oo
2 3 4 5 6 7 8 9
0
<
1 ! 1
FULL SAVE
•
-
•