TYAN Triumph i7230 Manual page 53

Serial Port 1:
Configure serial port 1 using options:
[Disabled]: No configuration
[Enabled]: User configuration
Options: Disabled / Enabled
Base I/O Address:
Set the base I/O address for serial port A.
Options: 3F8 / 2F8 / 3E8 / 2E8
Interrupt:
Set the interrupt for serial port A.
Options: IRQ3 / IRQ4
Serial Port 2:
Configure serial port 2 using options:
[Disabled]: No configuration
[Enabled]: User configuration
Options: Disabled / Enabled
Base I/O Address:
Set the base I/O address for serial port B.
Options: 3F8 / 2F8 / 3E8 / 2E8
Interrupt:
Set the interrupt for serial port B.
Options: IRQ4 / IRQ3
Serial Port 3:
Configure serial port 3 using options:
[Disabled]: No configuration
[Enabled]: User configuration
Options: Disabled / Enabled
Base I/O Address:
Set the base I/O address for serial port 3.
Options: 3F8 / 2F8 / 3E8 / 2E8
Interrupt:
Set the interrupt for serial port 3.
Options: IRQ5 / IRQ6
Parallel Port
Configure parallel port using options:
[Disabled]: No configuration
[Enabled]: User configuration
Options: Disabled / Enabled
Base I/O Address:
Set the base I/O address for the parallel port.
Options: 378 / 278 / 3BC / Disabled
53
http://www.tyan.com