Fueling; Information Before You Start - Stihl SR 430 Instruction Manual

7 Fueling

safety fuel-canisters only. When mixing, pour oil
into the canister first, and then add gasoline.
Examples
Gasoline Oil (STIHL 50:1 or equiva‐
lent high-quality oils)
liters liters
1 0.02
5 0.10
10 0.20
15 0.30
20 0.40
25 0.50
Dispose of empty mixing-oil canisters only at
authorized disposal locations.
7 Fueling
7.1 Preparations
► Before fueling, clean the filler cap and the area
around it to ensure that no dirt falls into the
tank.
► Position the machine so that the filler cap
faces up.
7.2 Opening screw-type tank cap
► Turn the cap counterclockwise until it can be
removed from the tank opening.
► Remove the cap.
0458-454-8221-F
7.3
Take care not to spill fuel while fueling and do
not overfill the tank. STIHL recommends you use
the STIHL filler nozzle (special accessory).
7.4
(ml)
(20)
(100)
(200)
(300)
(400)
(500)
► Place the cap in the opening.
► Turn the cap clockwise as far as stop and
8
With the engine stopped and before starting,
check the air intakes between the backplate and
powerhead for blockages and clean if necessary.
8.1
1 Setting lever
2 Throttle trigger
3 Throttle trigger lockout
8.2
Run position F
Engine runs or is ready to start. Throttle trig‐
ger (2) can be moved to any position.
Filling up with fuel
Closing screw-type tank cap
tighten it down as firmly as possible by hand.
Information Before You
Start
NOTICE
Control handle
1
2
Functions of setting lever
English
3
1)
13