HUAWEI USG6000E Series Quick Start
Cable Connection
Connect cables according to
not provide a power switch, it starts up immediately after receiving power. When
the SYS indicator on the frontpanel is blinking (once every two seconds), the
device is running and ready for configuration.
Figure 2-2 Connecting cables of USG6510E, USG6530E
Issue 02 (2022-08-22)
NO TE
After the power cable is installed, adjust the cable-retention clip to an appropriate position,
use a cable-retention clip to bundle the cable of the power adapter, and adjust the cable-
retention clip to fasten the cable.
Copyright © Huawei Technologies Co., Ltd.
2 Device Introduction and Cable Connection
Figure 2-2
and power on the device. As device does
6
Need help?
Do you have a question about the USG6000E Series and is the answer not in the manual?
Questions and answers