Table of Contents
Advertisement
Faults and what to do about them.
en
Drain the water
2.
Use a tool to pull the emergency
3.
release downwards and then
release.
The washing machine door can then
be opened.
Information on the display panel
Indicator
è off
è is lit up
è flashes
è and the ActiveOx-
ygen
Refresh Ø indicator
light flash
A off
A is lit up
A is flashing
r is lit up
r is flashing
E 3 sec is lit up
E 3 sec is flashing
40
~ Page 37
.
Cause/remedy
The door is unlocked at the end of the programme or when paused, laundry can be
added/removed
During the programme. Door locked.
■
Paused: Temperature too high. Wait until the temperature drops.
■
Paused: Spin speed too high. Wait until the drum comes to a halt.
■
Paused: Water level too high. It is not possible to add laundry. Touch A to
■
continue the programme.
Slowly: The door cannot currently be locked or unlocked. Waiting time
■
required.
Quickly: Close the door because water can flow out from the laundry.
■
The door cannot be opened due to programme-related technical reasons.
When the lights go off, the door can be opened.
At the end of the programme, while the door is open
After the programme has started
Before the programme starts, paused
Water pressure too low, may increase the length of the programme.
No water supply:
Turn the tap on fully,
■
The supply hose is kinked/trapped,
■
Clean the filter if necessary. ~ Page 39
■
The childproof lock is activated – deactivate it. ~ Page 33
The childproof lock is activated – the programme selector has been turned or the
control panel touched.
Advertisement
Table of Contents
