Connecting A Cable Converter Box And A Vcr; Connecting A Satellite Receiver And A Vcr - Toshiba CE27T11 Owner's Manual

Connecting Your TV (continued)

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium cable channels, as well as watch video tapes. Tune the TV
and VCR channels to 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels.
From Cable
Caution:
If you have a mono VCR, connect L/Mono to VCR Audio
OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video connections and
remove the video cable. Do not connect the video cable and
the S-video cable to VIDEO 1 simultaneously.
When you use a converter box with your TV, there may be
features that you cannot program using the remote control,
such as block channel, and programming your favorite
channels.

Connecting a satellite receiver and a VCR

This connection allows you to watch satellite, video and TV programs.
You can record one TV channel while watching another channel.
From satellite dish
Satellite Receiver
S-VIDEO VIDEO AUDIO
L R
OUT
OUT
Stereo VCR
6
Stereo VCR
S-VIDEO
IN OUT
Cable converter box
Satellite IN
TV
OUT
IN
VIDEO VIDEO VIDEO
L/ L/ L/
MONO MONO MONO
S-VIDEO
AUDIO AUDIO AUDIO
R R R
VIDEO1 VIDEO2
S-VIDEO VIDEO AUDIO
L R
OUT
IN
From antenna
VIDEO AUDIO
L R
IN
IN from ANT OUT to TV
OUT
TV
VIDEO
L/
MONO
S-VIDEO
OR
AUDIO
R
VIDEO1
Caution:
You can use a video cable instead of the S-video
cable, but the picture quality will decrease.
Do not connect the video cable and the S-video
cable to VIDEO 1 simultaneously.
Notes:
To watch from the Satellite Receiver, the TV
ANT
must select VIDEO 1.
(75
To watch from the VCR, the TV must select
VIDEO 2.
IN from ANT OUT to TV
CH3
CH4
CH3
CH4
OUT
IN
ANT
(75
VIDEO VIDEO
L/ L/
MONO MONO
AUDIO AUDIO
R R
VIDEO2