Connecting A Cable Converter Box; Connecting A Cable Converter Box And A Vcr - Toshiba CN32V71 Owner's Manual

Connecting a cable converter box

This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
From Cable
DVD IN
COLOR
STREAM
INPUT
L
AUDIO
R

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. You should keep your TV
selected to ANT-1 so that you can use the TV's features. When
viewing premium channels or recording with the VCR, select ANT-2
and change the TV channel to 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels.
You will need:
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
cable converter box
TV From Cable
DVD IN
COLOR
STREAM
INPUT
L
AUDIO
R
Stereo VCR
VIDEO
ANT (75 )
ANT-1 OUT ANT-2
OUT IN
VIDEO VIDEO 2 VIDEO 1
Y
VIDEO
L
MONO
L/MONO
Cb
S VIDEO
AUDIO
AUDIO
Cr
R R
IN OUT
cable converter box
ANT (75 )
ANT-1 OUT ANT-2
OUT IN
VIDEO VIDEO 2 VIDEO 1
Y
VIDEO
L
MONO
Cb L/MONO
S VIDEO
AUDIO
AUDIO
Cr
R R
AUDIO
L R
IN
IN from ANT OUT to TV
CH 3
OUT
CH 4
3
Note:
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.
Caution:
If you want to record one channel while
watching another channel, a splitter (not
included) must be added between the cable
and ANT-1. One output of the splitter goes to
ANT-1 and the second output is connected to
IN on the cable converter box.
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable. Do
not connect the video cable and the
S-video cable to Video-1 simultaneously.
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.