Using The Remote With Vcr Or Cable Tv Converter - Toshiba CE27T11 Owner's Manual

Using the Remote with VCR or Cable TV Converter

To control a TOSHIBA VCR, first press the VCR button. The buttons shown below will then control the VCR.
The rest of the buttons operate the TV as usual.
If you have another brand of VCR, you can probably program your Remote to control it.
Details are on page 11.
To control a cable TV converter, this Remote Control must be programmed to recognize the brand of your
converter. See page 11.
The shaded buttons can be used to control the cable TV converter.
Press the CABLE button whenever you control the cable TV converter.
VCR
Press to control VCR.
CABLE
Press to control cable
TV converter.
Channel Number
Press the numbers
desired for direct
access.
STOP
Press to stop the tape.
REC
Press to start recording.
TV/VCR
Press to the TV mode to
view one program while
recording another
program.
10
Aim at the VCR or cable TV converter
POWER
MTS
TIMER
TV VCR
CABLE
1 3
2
4 5 6
7 8 9
CH RTN
100 0 ENT
ADV
FAV
MENU
-
ADV
MUTE RECALL TV/VIDEO SURROUND
STOP SOURCE PLAY PIP
REC TV/VCR REW
STILL LOCATE SWAP
POWER
Press the button to turn the VCR
(or converter) on.
Press again to turn off.
CHANNEL s / t
CH
Press s button to select next
higher channel.
Press t button to select next
VOL
lower channel.
ENTER
Some VCR's and Cable TV
converters requires ENT to change
SUR
channel number.
This button does not function until
you program the Remote Control to
FAV
+
enter the VCR (or CABLE) code.
PLAY
Press to begin tape playback.
FF
Press to rapidly advance the tape.
In playback mode, press to view
FF
the picture moving rapidly in
forward direction.
REW
Press to rewind the tape.
In playback mode, press to view
picture moving rapidly in
reverse.