Table of Contents
Advertisement
Connecting a cable converter box
This connection allows you to watch basic and premium cable
channels. To use the TV features (such as PIP swap, Channel
channel block, favorite channels, or channel labels ), select ANT-1. To
view premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• two coaxial cables
From Cable
ANT (75 )
OUT
DVD IN
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to Video1 (see "Watching video input" on page 24). Tune the VCR to
channel 3 or 4 (the same channel as the converter box output switch).
Use the cable converter box to change channels. Set the PIP source to
TV mode (see page 36).
You will need:
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
• one cable splitter
TV
ANT (75 )
ANT-1
OUT
ANT-2
OUT
DVD IN
COLOR
STREAM
INPUT
VIDEO
L/MONO
L
AUDIO
AUDIO
R
R
Stereo VCR
VIDEO
AUDIO
L
IN
Cable
Converter
Box
OUT
OUT
IN
S-VIDEO
Y
VIDEO
Pb
L/MONO
AUDIO
Pr
R
VIDEO 2
VIDEO 1
IN
OUT
R
IN
IN from ANT
OUT to TV
CH 3
OUT
CH 4
9
Note:
,
When you use a converter box with your TV,
y z
the remote control may not operate certain
features, such as PIP swap, channel y z,
channel block, favorite channels, or channel
labels.
From Cable
Cable
Signal
IN
Note:
Splitter
When you use a converter box with your
TV, the remote control may not operate
certain features, such as PIP swap,
channel y z, channel block, favorite
channels, or channel labels.
If you have a mono VCR, connect
L/Mono to VCR Audio OUT using only
one audio cable.
Cable
Converter Box
If you have an S-VHS VCR, use an
S-video cable instead of a regular video
cable.
Do not connect a regular video cable
and an S-video cable to Video-1 (or
Video-2) at the same time.
Advertisement
Table of Contents
