Logitech A50 X Setup Manual page 25

4.6 DOCKING AND CHARGING HOW TO
The A50 X requires a dedicated external power source Please use the included AC adapter and USB Combo (Y) Cable For details,
please see section 3.2 Connecting to TV and Power
After each session of use, it is recommended to keep the A50 X headset docked to the Base Station, this will allow the battery to stay
topped off and ready for use After each session, we recommend docking the headset to the Base Station Alternatively, the headset
includes a USB-C port (located on the right ear) to allow for wired charging during use or quick top offs
Use
1
Before docking, make sure the headset is in the correct orientation; the boom mic should be on the left-hand side and the button
controls should be facing you
2
Make sure to flip the boom mic to the up (muted) position and the ear cups are not rotated or flipped inwards towards you
3
Gently place the headset on the Base Station be sure to check both Left and Right tubes are extended to the same lengths
and positions, this will help the headset align properly
4
The Base Station has 4 LEDs indicating the headset's battery state of charge, in 25% increments
5
The headset has one LED integrated into the power switch:
•
Power On/Battery Full: White
•
Sleep Mode: Breathing White
•
Battery Charging: Orange
•
Battery Low: Steady Red
•
Battery Critical (less than 15 minutes playtime remaining): Breathing Red
25 ENGLISH