Logitech A50 X Setup Manual page 23

4.4 PC HOW TO
The A50 X works best with Windows 10/11 PCs when used with the included USB Combo (Y) Cable and Power Adapter
The A50 X provides several USB Audio endpoints that can be used for different functions or needs Your A50 X also features
Dolby Atmos with the included lifetime license
Configure
1
Place A50 X headset in the Base Station dock and powered on
2
Under Setting > Sound > Output:
•
Make sure Output is set to A50 X Game Your system will now use this Audio Endpoint as the main output
• Optional: you can also set the Spatial Audio format by clicking on A50 X Game to navigate to its Properties, then under
Spatial Audio drop down, select either Microsoft Windows Sonic for Headphones or Dolby Atmos for Headphones if desired
3
Under Setting > Sound > Input:
• Make sure Input is set to A50 X Mic Out Your system will now use the A50 X as the main microphone
4
Optional: You'll notice a secondary USB Audio Output Endpoint labeled A50 X Voice If desired, you can point your chat application
or your game's chat output to this Audio Endpoint Doing so will enable the Game-Voice balancing feature that's assigned to
the on headset controls
5
Optional: You notice a secondary USB Audio Input Endpoint labeled A50 X Stream Out This is used for the Stream Output feature
of A50 X For details, please see the Stream Output section
Use
1
Whenever the Base Station is USB connected to your PC and connected to power, the A50 X will always output audio if set
as the primary audio device Docking and Undocking the headset will not affect your system's audio output and does not
cause the audio to redirect
•
Note: the included Dolby Atmos license is hardware bound to your A50 X Activating and using this feature on XBOX
requires both HDMI and USB connections to made to the console
23 ENGLISH