Logitech A50 X Setup Manual page 21

4.2 XBOX HOW TO
The A50 X works best with the XBOX Series X and S consoles when both HDMI and USB connections are used
Your A50 X also features Dolby Atmos with the included lifetime license
Configure
1
Place A50 X headset in the Base Station dock and powered on
2 In XBOX Settings > Volume and audio output > Speaker audio:
•
If you have a TV/Stereo speakers, choose "Stereo uncompressed"
•
If your equipment is capable, selecting "Dolby Atmos for home theater (HDMI only)" is recommended
3 For Headset audio, select Stereo uncompressed or Dolby Atmos for Headphones
4
Under Additional options, leave everything else unchecked
Use
1
When the Headset is docked/powered off, Audio from the XBOX will pass through the A50 X Base Station to the TV/Speaker
If Dolby Atmos is used, XBOX will automatically set it to Home theater mode
2
When the headset is undocked/powered on, Audio from the XBOX will be auto-routed to the headset If Dolby Atmos is used,
XBOX will automatically set it to Headphones mode XBOX will notify on screen when the headset is successfully assigned
and appropriate modes are set
•
If the A50 X headset is undocked, you can power it off at any time to resume audio playback to your TV/Speakers
•
Note: the included Dolby Atmos license is hardware bound to your A50 X Activating and using this feature on XBOX
requires both HDMI and USB connections to made to the console
21 ENGLISH