Replacing A Blown Fuse - Vitus Audio Reference Series Owner's Manual

4. OPERATION AND SERVICE

Replacing a blown fuse

REMOVE THE POWER CABLE
1.
The fuse carrier is placed on the back of the external
power supply under the power connector.
3.
Pull the fuse carrier out.
5.
Take the blown fuse out of the fuse carrier and throw it away.
20 | RS-101 Owner's manual
2.
Loosen the fuse carrier using a flat object like a flat screwdriver.
Blown fuse
Spare fuse
4.
There is a spare fuse available in the fuse carrier.
6.
Push the spare fuse out using a pointy object.
Replacing a blown fuse
7.
Place the spare fuse in the 8 fuse carrier and click the fuse
in place.
4. OPERATION AND SERVICE
8.
Push the fuse carrier back into the machine.
RS-101 Owner's manual | 21