Download Print this page

Jandy Infinite WaterColors R0979800 Installation Manual page 2

Led light controller

Advertisement

Available languages

Available languages

Jandy
FOR YOUR SAFETY - This product must be installed and serviced by a contractor who
is licensed and qualified in pool equipment by the jurisdiction in which the product will
be installed, where such state or local requirements exist. In the event no such state or
local requirement exists, the maintainer must be a professional with sufficient experience
in pool equipment installation and maintenance, so that all of the instructions in this
manual can be followed exactly. Before installing this product, read and follow all warning
notices and instructions that accompany this product. Failure to follow warning notices
and instructions may result in property damage, personal injury, or death. Improper
installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may
cause serious injury, property damage, or death.
If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
Potentially high voltages in the power center can create dangerous electrical
hazards, possibly causing death, serious injury or property damage. Turn off
power at the main circuit feeding the power center to disconnect the power
center from the system.
ATTENTION INSTALLER: This manual contains important information about the
installation, operation and safe use of this product. This information should be
given to the owner/operator of this equipment.
Page 2
Infinite WaterColors
®
LED Light Controller | Spare Parts Installation Manual
WARNING
WARNING
WARNING
WARNING

Advertisement

loading