Yamaha YZF-R6 2017 Owner's Manual page 71

Periodic maintenance and adjustment
1. Torque wrench
Tightening torque:
Oil filter cartridge:
17 N·m (1.7 kgf·m, 13 lb·ft)
11. Install the fuel tank breather hose
and overflow hose into the guides,
then place them in their original
position.
12. Install the shift arm by aligning the
slot in the shift arm with the mark
on the shift shaft and installing the
shift arm bolt, then tightening it to
the specified torque. NOTICE: Be
sure to align the slot and mark
to ensure proper shifting. If the
slot and mark are not aligned,
the shift arm will not move cor-
rectly and you may not be able
to shift up or down.
1
1. Shift arm
2. Shift arm bolt
3. Slot
4. Shift shaft
5. Mark
13. Install the engine oil drain bolt and
14. Refill with the specified amount of
[ECA24140]
TIP
Be sure to wipe off spilled oil on any
parts after the engine and exhaust sys-
tem have cooled down.
8-15
1
Tightening torque:
Shift arm bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 N·m (4.3 kgf·m, 32 lb·ft)
the recommended engine oil.
Recommended engine oil:
See page 10-1.
Oil quantity:
Oil change:
2.40 L (2.54 US qt, 2.11 Imp.qt)
With oil filter removal:
2.60 L (2.75 US qt, 2.29 Imp.qt)
2
3
4
5
8