Traction Control System - Yamaha YZF-R6 2017 Owner's Manual

Special features

Traction control system

The traction control system (TCS)
helps maintain traction when acceler-
ating on slippery surfaces, such as un-
paved or wet roads. If sensors detect
that the rear wheel is starting to slip
(uncontrolled spinning), the traction
control system assists by regulating
engine power as needed until traction
is restored.
WARNING
4
The traction control system is not a
substitute for riding appropriately
for the conditions. Traction control
cannot prevent loss of traction due
to excessive speed when entering
turns, when accelerating hard at a
sharp lean angle, or while braking,
and cannot prevent front wheel slip-
ping. As with any vehicle, approach
surfaces that may be slippery with
caution and avoid especially slip-
pery surfaces.
1
1. Engine trouble warning light "
2. Traction control system indicator light "
3. TCS display
EAU79732
EWA15433
2
3
"
"
4-2
The " " indicator light flashes when
traction control has engaged. You may
notice slight changes in engine and ex-
haust sounds when the system has en-
gaged.
When the traction control system is
turned off, the "
come on.
TIP
 When the vehicle is turned on, the
traction control system is turned
on and set to the last used TCS
setting.
 The current TCS setting is shown
in the TCS display (page 5-10).
TCS settings
TCS "OFF"
TCS "OFF" turns the traction control
system off.
TCS "1"
TCS "1" minimizes traction control
system assist.
TCS "2, 3, 4, 5"
TCS levels "2" through "5" sequentially
increase traction control system assist.
TCS "6"
TCS "6" maximizes traction control as-
sist; wheel spin is most strongly con-
trolled.
NOTICE
Use only the specified tires. (See
page 8-20.) Using different sized
tires will prevent the traction control
system from controlling tire rotation
accurately.
" indicator light will
ECA16801