Samsung WW10J5 Series User Manual page 50

Troubleshooting
Problem
1C
AC
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
50 English
WW10J5260GW_03504U-01_EN.indd 50
The WaterLevel sensor is not working properly.
• Try power off and restarting the cycle.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "1C" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
Action
2016/4/1 13:40:31