Seagate BARRACUDA COMPUTE ST2000DMZ08 Product Manual page 22

Table 9 Supported ATA commands
ATA-standard commands names
Read Verify Sectors Extended
Read Verify Sectors without Retries
Seek
Set Features
Set Max Address
Note: Individual Set Max commands are identified by the value
placed in the Set Max Features register as defined to the right.
Set Max Address Ext
Set Multiple Mode
S.M.A.R.T. Disable Operations
S.M.A.R.T. Enable/Disable Autosave
S.M.A.R.T. Enable Operations
S.M.A.R.T. Enable/Disable Auto Offline
S.M.A.R.T. Enable One Attribute Modification
S.M.A.R.T. Execute Offline
S.M.A.R.T. Free Fall Protection Host Interface
S.M.A.R.T. Read Attribute Thresholds
S.M.A.R.T. Read Data
S.M.A.R.T. Read Log Sector
S.M.A.R.T. Return Status
S.M.A.R.T. Save Attribute Values
S.M.A.R.T. Write Attribute Thresholds
S.M.A.R.T. Write Attribute Values
S.M.A.R.T. Write Log Sector
Trusted Receive
Trusted Receive DMA
Trusted Send
Trusted Send DMA
Write Buffer
Write DMA
Write DMA Extended
Write DMA without Retries
Write Long with Retries
Seagate BarraCuda Product Manual, Rev. J
Command code (in hex)
42h
41h
70h
EFh
F9h
Address:
Password:
Lock:
Unlock:
Freeze Lock:
37h
C6h
B0h/D9h
B0h/D2h
B0h/D8h
B0h/DBh
B0h/E0h
B0h/D4h
FEh
B0h/D1h
B0h/D0h
B0h/D5h
B0h/DAh
B0h/D3h
B0h/D7h
B0h/E1h
B0h/D6h
5Ch
5Dh
5Eh
5Fh
E8h
CAh
35h
CBh
32h
00
H
01
H
02
H
03
H
04
H
(SED only)
(SED only)
(SED only)
(SED only)
20