Power On Display - Toshiba Tecra M4-103 User Manual

General
This window displays the BIOS version and contains two buttons: Default
and About.
Default
About
Setup
This field displays BIOS Version and date.
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.

Power On Display

Lets you use the display to be used when the computer is booted (This
setting is only available on Standard VGA mode and not available on
Windows Desktop).
Auto-Selected
LCD + Analog RGB
System LCD Only
If the connected external monitor does not support the SVGA mode,
selecting the LCD + Analog RGB mode will not display the screen on that
monitor.
At Windows start-up, the screen is displayed on the external monitor if it
was connected at the time of the previous power-off, and is found at the
start-up. Otherwise, the screen is displayed on the internal LCD.
TECRA M4
Return all HW Setup values to the factory
settings.
Display the HW Setup version.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
Selects both the internal LCD and external
monitor for simultaneous display.
Selects the internal LCD even if the external
monitor is connected.
HW Setup
7-2