Toshiba Tecra M4-103 User Manual page 43

Universal Serial Bus
(USB 2.0) port
External monitor
port
Video-out jack
Modem jack
■
Connection to any communication line other than an analog phone line
could cause a PC system failure.
■
■
■
■
■
Never operate your PC on AC power during a thunderstorm. If you see
lightning or hear thunder, immediately turn off the PC. An electric surge
caused by the storm, may result in a system failure, loss of data or
hardware damage.
LAN jack
■
Do not connect any cable other than a LAN cable to the LAN jack. It
could cause damage or malfunction.
■
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
Link indicator
(green)
TECRA M4
The Universal Serial Bus port is on the back side.
Refer to
This external monitor port lets you connect an
external video display.
Plug an S-Video cable into this jack for video-out.
The S-Video cable carries video signal.
IThe modem jack lets you use a modular cable to
connect the modem directly to a telephone line.
Connect the built-in modem only to ordinary analog phone lines.
Never connect the built-in modem to a digital line (ISDN).
Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).
Never connect the built-in modem to a key telephone system for
residences or offices.
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). The LAN has two
indicators. Refer to Chapter 4,
for details.
This indicator glows green when the computer is
connected to a LAN and the LAN is functioning
properly.
Left side section, for details.
The Grand Tour
Operating Basics,
2-6