Rapid Heating; Care And Cleaning; Cleaning Agents; Detaching And Refitting The Rails - Siemens HB311 0 Series Instruction Manual

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
Set the function selector to
1.
Use the temperature selector to set the temperature.
2.

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
Wipe the appliance with plenty of water and
Stainless steel
some washing-up liquid. Always wipe parallel
fronts
to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. The stain-
less steel fronts can be polished using a spe-
cial care product. Follow the manufacturer's
instructions. You can purchase special stain-
less steel cleaner from our after-sales service
or from specialist retailers.
Wipe the appliance with some washing-up liq-
Enamel sur-
uid and warm water. Dry with a soft cloth.
faces and lac-
quered
surfaces
Wipe the appliance with some washing-up liq-
Knobs
uid and warm water. Dry with a soft cloth.
Can be cleaned with glass cleaner. Do not
Glass panel
use any abrasive cleaning agents or sharp
metal objects. These could scratch and dam-
age the surface of the glass panel.
Wipe with a damp cloth. Dry with a soft cloth.
Seal
8
.
I
The oven will start heating after a few seconds. The indicator
light above the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
Clean with hot water or vinegar solution. For
Inside the
heavy soiling: Only use oven cleaner on cold
oven
surfaces.
Wipe the appliance with some washing-up liq-
Glass cover on
uid and warm water. Dry with a soft cloth.
the oven light
Soak in hot soapy water. Clean with a brush
Accessories
or a sponge.
Do not clean in the dishwasher. Never use
Aluminium
oven cleaner. To avoid scratches, never touch
baking tray
the metal surfaces with a knife or similar
(option)
sharp object. Clean horizontally with some
washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth. Dry with a soft
cloth. Do not use any abrasive materials,
scouring sponges or rough cleaning cloths.
They could scratch the baking tray
If a childproof lock has been fitted on the
Childproof
oven door, it must be removed before clean-
lock (option)
ing. Soak all plastic parts in hot soapy water
and wash with a sponge. Dry with a soft cloth.
If very dirty, the childproof lock will not work
properly.
Information on care and cleaning can be
Hob
found in the instruction manual for your hob.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
Hold the shelf frames from underneath and pull slightly
1.
forward. Pull the extension pins at the bottom of the rails out
of the mounting holes (Fig. A).
Then fold the rails upwards and carefully remove them
2.
(Fig. B).
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.