7-2.1. System Name - Clover LCD2084 Instruction Manual

Instruction Manual
Stand-alone DVR

7-2.1. SYSTEM NAME

The SYSTEM NAME is one of the important factors to access the DVR through MNS (MAC
NAME SERVER) with the DvrMaster (GUI).
You can't access the DVR system if the SYSTEM NAME you entered already exists
on the network. Try to connect the system with other SYSTEM NAME.
▫ Click the "SYSTEM NAME" button in the SYSTEM menu, then the On Screen Keyboard
will display as shown in [Fig. 7-5].
▫ Delete the existing SYSTEM NAME with the
▫ Enter the new SYSTEM NAME using the On Screen Keyboard and click on the OK button
to save.
▫ Click the "EXIT" button to return to the SYSTEM menu.
You should type the System Name up to 15 characters in order to utilize the MNS
Note:
server (See section 7-7.5.)
button on the On Screen Keyboard.
[Fig. 7-4 System name button]
[Fig. 7-5 On Screen Keyboard]
80