Instruction Manual
Stand-alone DVR
- Window Clear
Right-click on the setting window for Motion Detection Area ([Fig. 7-75]), and then the
pop-up setting window for Motion Detection Area will be displayed ([Fig. 7-76]).
By clicking the mouse, select the
window in order to clear the Motion Detection Area, and then the motion detection area
you have created will be displayed. Click the starting point and the ending point as much
as you wish to clear or it can be cleared by ALL CLEAR as described above (See ALL
CLEAR).
[Fig. 7-81 Window Clear setup screen]
114
button on the pop-up setting