Clover LCD2084 Instruction Manual page 109

▫ Pre-Alarm Time Setup
Allows you to record a section of video just prior to Motion or Sensor activation. Click the
mouse on the PRE in the MOTION menu and choose one of the values among 1 through
30 seconds in the pop-up table by clicking.
▫ Motion Hold Time Setup
The system continues recording for the MOTION HOLD TIME and finishes the recording.
Click the mouse on the HOLD in the MOTION menu and choose one of the values among
1 through 30 seconds in the pop-up table by clicking.
▫ Spot Setup
If the "ON" is selected by clicking the mouse on the SPOT button in the MOTION menu, a
full screen will display when a motion is detected. If the "OFF" is selected, the full screen
won't be displayed even though motion of objects is detected.
[Fig. 7-72 Pre-Record Time setup button]
[Fig. 7-73 Hold-Record Time Setup button]
[Fig. 7-74 Spot Setup button]
109
7. Setup