Setting Rapid Heating - Siemens HB76GT 60 Series Instruction Manual

Press the button.
‚
2.
The symbol changes to the temperature.
Î
Modify the suggested temperature using the rotary selector.
3.
Press the † button.
4.
Appliance operation begins.
Once the dish is ready, switch the oven off with the
5.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the ± button briefly. The current heating temperature in
the cooking compartment is displayed for several seconds.
Opening the oven door
Operation is suspended. The
is closed again, operation resumes.
Pausing operation
Press the † button briefly. The oven is paused. The
flashes. To resume, press the
lights up. The programme will then continue.
Cancelling operation
Press and hold the † button until the
and 160 °C appear. You can make new settings.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
‡
† button flashes. When the door
†
† button again. The †
: symbol for 3D hot air

Setting rapid heating

Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
:
Top/bottom heating
%
HydroBaking
'
Pizza setting
;
A short signal sounds to indicate that the selected type of
heating is not suitable for rapid heating.
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the button to activate rapid heating. The
h
appears next to the temperature. Rapid heating begins. The
temperature indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
in the cooking compartment.
Notes
Rapid heating is cancelled if you change the type of heating.
■
If a cooking time has been set, this runs independently of
■
rapid heating and counts down immediately when operation
is started.
You can use the
■
compartment temperature during rapid heating.
To ensure an even cooking result, do not place your dish in
■
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the button. The symbol goes out.
h
button.
button
button
symbol goes out. Place your dish
c
button to check the current cooking
±
symbol
c
11