Changing The Selections After Programme Has Started; Canceling The Programme; End Of Programme - Beko WMB 508311 D User Manual

If the level is unsuitable, Loading Door light
turns off and the loading door cannot be
opened. If you are obliged to open the
Loading Door while the Loading Door
light is off, you have to cancel the current
programme; see "Canceling the programme".
Changing the selections after
programme has started
Switching the machine to pause mode
Press the Start / Pause button to switch
the machine to pause mode while a
programme is running. The light of the step
which the machine is in starts flashing in the
Programme Follow-up indicator to show that
the machine has been switched to the pause
mode.
Also, when the loading door is ready to be
opened, Loading Door light will also illuminate
continuously in addition to the programme
step light.
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
C
If no change is allowed, the relevant light
will flash for 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch
the machine to pause mode. The
programme follow-up light of the relevant
step during which the machine was
switched into the pause mode will flash.
2. Wait until the Loading Door can be
opened.
3. Open the Loading Door and add or take
out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause button to start the
machine.

Canceling the programme

To cancel the programme, turn the
Programme Selection knob to select another
programme. Previous programme will
be canceled. End / Cancel light will flash
continuously to notify that the programme
has been canceled.
Pump function is activated for 1-2 minutes
regardless of the programme step, and
whether there is water in the machine or
not. After this period, your machine will be
ready to start with the first step of the new
programme.
C
Depending on the step where the
programme was canceled in, you may
have to put detergent and softener again
for the programme you have selected
anew.

End of programme

"End" appears on the display at the end of
the programme.
1. Wait until the loading door light
illuminates steadily.
2. Press On / Off button to switch off the
machine.
3. Take out your laundry and close the
loading door. Your machine is ready for
the next washing cycle.
22
EN