Table of Contents
Advertisement
Available languages
Available languages
Washing takes longer time than the one specified in the manual.
•
Water pressure is low. >>> Machine waits until taking in adequate amount of water to
prevent poor washing quality due to the decreased amount of water. Therefore, the
washing time extends.
•
Voltage might be low. >>> Washing time is prolonged to avoid poor washing results
when the supply voltage is low.
•
Input temperature of water might be low. >>> Required time to heat up the water
extends in cold seasons. Also, washing time can be lengthened to avoid poor washing
results.
•
Number of rinses and/or amount of rinse water might have increased. >>> Machine
increases the amount of rinse water when good rinsing is needed and adds an extra
rinsing step if necessary.
•
Excessive foam might have occurred and automatic foam absorption system might have
been activated due to too much detergent usage. >>> Use recommended amount of
detergent.
C
Machine does not switch to spinning step when the laundry is not evenly distributed in
the drum to prevent any damage to the machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
Programme time does not countdown. (On models with display)
•
Timer may stop during water intake. >>> Timer indicator will not countdown until the
machine takes in adequate amount of water. The machine will wait until there is sufficient
amount of water to avoid poor washing results due to lack of water. Timer indicator will
resume countdown after this.
•
Timer may stop during heating step. >>> Timer indicator will not countdown until the
machine reaches the selected temperature.
•
Timer may stop during spinning step. >>> Automatic unbalanced load detection system
might be activated due to the unbalanced distribution of the laundry in the drum.
C
Machine does not switch to spinning step when the laundry is not evenly distributed in
the drum to prevent any damage to the machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
Programme time does not countdown.
•
There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load
detection system might be activated due to the unbalanced distribution of the laundry in
the drum.
C
Machine does not switch to spinning step when the laundry is not evenly distributed in
the drum to prevent any damage to the machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
Machine does not switch to spinning step.
•
There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load
detection system might be activated due to the unbalanced distribution of the laundry in
the drum.
C
Machine does not switch to spinning step when the laundry is not evenly distributed in
the drum to prevent any damage to the machine and to its surrounding environment.
Laundry should be rearranged and re-spun.
•
The machine will not spin if water is not drained completely. >>> Check the filter and the
draining hose.
•
Excessive foam might have occurred and automatic foam absorption system might have
been activated due to too much detergent usage. >>> Use recommended amount of
detergent.
27
EN
Advertisement
Table of Contents
