Power Connection - Cata MDS 7205 X Installation, Use And Maintenance Instructions

Table of Contents

Advertisement

Available languages

Available languages

POWER CONNECTION

6
POWER CONNECTION
n
The appliance shall be connected to the main electrical installation as per the
current rules and legislation and by an authorized service only.
n
Ensure that the power received from the mains meet the power specified in
the nameplate placed on the bottom front of the appliance.
n
If the current value of the switch in your house is less than 16A, have a quali-
fied electrician install an 16A fuse switch.
n
The appliance shall always be grounded. Have an authorized electrician set
grounding equipment.
n
Power cable of your oven is fitted with a grounded plug. This plug must be
used with a grounded line.
n
Place the appliance so that the outlet or double pole switch used for power
connection may be reached easily.
n
Do not place the power cord in contact with hot surfaces and do not pinch it to
the product cover.
n
The temperature of the power cord shall not reach a temperature that is 50 ˚C
above the ambient temperature.
n
Please contact the nearest Authorized Service when the power cord gets
damaged. Have the authorized service replace the cord with a new one with
the same dimensions and plastic insulation and that may withstand the elec-
trical current required by the appliance.
n
If the appliance shall be connected directly to the mains, a double pole switch
suitable for carrying the desired load as per the current legislation and with a
clearance of 3mm between its contact points shall be installed between the
appliance and the mains. Grounding wire shall not be cut off by the double
pole switch.
n
We do not recommend usage of adapters, multi sockets or extension cords. If
it is absolutely required, you may use adaptors or extension cords by com-
plying with the applicable safety legislation. However, you shall never exceed
the maximum current capacity and the maximum power specified for the
adaptor.
n
Test the heating elements for 3 minutes when the connection is complete.
Electrical safety of the appliance is guaranteed when it is correctly con-
nected to a suitable source with proper grounding as per the applicable
rules only. Our company shall not be held responsible for damages that
may occur on people, animals or objects due to improper grounding of the
appliance.
18
OVEN USER GUIDE ENGLISH
26.03.2020

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Mds 7206 xMds 7206 whMds 7206 bk

Table of Contents