Samsung AM AN4PKH Series Installation Manual page 35

Changing the addresses and options individually
When you want to change the value of a specific option, refer to the following table and follow the steps in Common
steps for setting the addresses and options on page 20.
Option SEG1
Function Page
Indication Details Indication
Indication and
details
0
Example: Changing the Buzzer control (SEG17) option of the installation options to 1 disuse.
Option SEG1
Function Page
0
Indication
CAUTION
• If your indoor units support both cooling and heating, the mixed operation (two or more indoor units operate in different
modes simultaneously) is not available when the indoor units are connected to the same outdoor unit. If you set an indoor
unit as the master indoor unit by using the remote control, the outdoor unit automatically operate in the current mode of
the master indoor unit.
SEG2 SEG3
Type of the option to
Mode
change
Details Indication Details
Option
D 0 to F
type
SEG2 SEG3
Type of the
Mode
option to change
D 2
SEG4 SEG5
Tens position of the Units position of the
option number option number
Indication Details Indication
Tens Units
0 to 9
position position
value value
SEG4 SEG5
Tens position Units position
of the option of the option
number number
1
SEG6
New value
Details Indication Details
New
0 to 9 0 to F
value
SEG6
New value
7 1
35
English