Samsung AM AN4PKH Series Installation Manual page 27

Option SEG13
Function Page
Indication Details
Indication and
details
2
CAUTION
• If you enter A to F to the SEG5 or SEG6, the indoor unit main
address is not changed.
• If you enter 0 to the SEG 3, the indoor unit maintains the
previous main address although you enter the option value
for the SEG5 or SEG 6.
• If you enter 0 to the SEG 9, the indoor unit maintains
previous RMC address although you enter the option value
for the SEG11 or SEG12.
• You cannot set the SEG11 or SEG12 to F value at the same
time.
• If the indoor unit is connected to the MCU, you can set the
SEG 15~18.
• Ex.) If you want to set the indoor unit to ' A ' port of MCU #1.
(0A0000 – 100000 – 20101A -30000)
SEG14 SEG15
Setting MCU PORT
-
address
Indication Details
No MCU
0
PORT
-
MCU PORT
address
1
setting
mode
SEG16
10-digit of MCU address 1-digit of MCU
Indication Details Indication
0~1 10-digit 0~9
Setting the indoor unit installation option
(suitable for the condition of each installation
location)
1 Make sure that the power is supplied to the indoor
unit.
• If the indoor unit is not plugged in, it must include a
power supply.
2 Make sure that the panel or display is connected to the
indoor unit so that it can receive options
1(L)
2(N)
3 Set an address for each indoor unit using the remote
control, according to your air conditioning system plan.
• The indoor unit addresses are set to 020010-
100000-200000-300000 by default.
• The SEG20 option, Individual control with remote
control, allows you to control multiple indoor units
individually by using the remote control.
SEG17 SEG18
MCU PORT address
Details Indication Details
PORT
1-digit A~F
Location
Indoor unit
F2
F1
English
27