Table of Contents
Advertisement
Installation
STEP 6 Position the drain hose
STEP 7 Power on
Plug the power cord into a wall socket featuring an AC 220-240 V / 60 Hz approved
electrical outlet protected by a fuse or circuit breaker. Then, press POWER to turn on the
washing machine.
28
English
Untitled-2 28
ln a sink drain pipe
The drain pipe must be above the sink
siphon so that the end of the hose is at
least 60 cm above the floor.
ln a drain pipe
The drain pipe should be between 60 cm
and 90 cm high (*). It is advisable to use
a 65 cm high vertical pipe. Make sure the
drain hose is connected to the stand pipe
at a slant.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of 60
litres per minute
8/8/2017 6:52:22 PM
Advertisement
Table of Contents
