Table of Contents
Advertisement
Installation
For models with an additional hot water inlet:
Aqua hose (applicable models only)
A
26
English
Untitled-2 26
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
CAUTION
As the hot water temperature can only
be controlled by hot water-related cycles,
make sure to connect the hot water supply
to the hot water hose.
The aqua hose alerts users of a risk of
water leaks. It senses the water flow and
turns red on the centre indicator (A) in
case of a leak.
NOTE
The end of the aqua stop hose must
be fitted to the water tap and not the
machine.
8/8/2017 6:52:21 PM
Advertisement
Table of Contents
