Failure Codes And What To Do In Case Of Failure - Nordmende DSSN60BL Instruction Manual

FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE

ERROR CODE
Wash Rinse Dry
ERROR DESCRIPTION
End Start/Pause
Inadequate water supply
Error of continuous water input
The waste water in the machine
cannot be discharged.
Heater error
Alarm is active against water
overflow
Faulty electronic card
Overheating error (temperature
in the machine is too high)
Divisor position error
Faulty heater sensor
CONTROL
Make sure the water input tap is totally open and that
•
there is no water cut.
• Close the water input tap, separate the water input hose
from the tap and clean the filter at the connection end of
the hose.
Restart your machine, contact the service if the error
•
resumes.
Close the tap.
•
• Contact the service.
Water discharge hose is clogged.
•
• The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
Contact the service.
Power off your machine and close the tap.
•
• Contact the service.
Contact the service.
Contact the service.
Contact the service.
Contact the service.