Switching On The Machine And Selecting A Programme; Switching On The Machine; Programme Follow-Up; Changing A Programme - Nordmende DSSN60BL Instruction Manual

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine

Program follow-up
You can follow the program flow using the program follow-up lambs located on the control panel.
As long as washing continues,
the lights of washing, rinsing and
drying are on respectively.

Changing a programme

If you would like to change programs while a washing program is continuing.
Press once the Power
Start/Pause key.
The lamp on Program Start/Pause key
goes off once the Program starts and
the washing lamp is highlighted.
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
After the program stops, select
your desired program via the
Program selection button.
1. Press the Power On/Off key.
2. Select the program suiting your
dishes via the Program Selection
button.
3. If you prefer or wish to prefer,
you can choose additional
function.
4 Start the program pressing
the Power Start/Pause key.
Once the program is over, the
lamp Finished is illuminated.
21
Do not open the cover before
the lamp Finished is on.
The new program started
will resume the course of
the old program.
Start the program you have
newly selected by pressing
again the Start/Pause key.