Loading Your Dishwasher; Top Basket - Nordmende DSSN60BL Instruction Manual

LOADING YOUR DISHWASHER

If you properly place your dishes into the machine, you will be using it in the best way in terms
of energy consumption, washing and drying performance.
There are two separate baskets for you to load your dishes into your machine. You can load into
the lower basket such round and deep items as pots with long handles, pot lids, plates, salad
plates, cutlery sets.
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups and
glasses. When placing long-stem glasses and goblets, lean them against the basket edge, rack
or glass supporter wire and not against other items. Do not lean long glasses against one
another or they cannot remain steady and may receive damage.
It is more appropriate to locate the thin narrow parts into the middle sections of baskets.
You can place spoons among the other cutlery sets in order to prevent them from sticking to
one another. You are recommended to use the cutlery grid in order to obtain the best result.
To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as
serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the upper and
lower spray arms from spinning.

Top basket

Dish rack
There are dish racks on the upper basket of your
machine. a b You can use these dish racks in
open or closed position. When they are in open
position a you can place your cups on them; and
when in closed position b you can place long
glasses on the basket. Also, you can use these
racks by placing long forks, knives and spoons
on them laterally.
Top basket height adjustment
Top basket of your machine is in upper position. When it is in this position, you can place big
items such as pans, etc. on lower basket. When you take top basket to lower position, you can
place and wash big sized plates on the top basket.
Use wheels in order to change the basket height. Open the basket retaining parts at the end of
top basket rails by turning them to the sides, and take the basket out. Change the position of the
wheels; reinstall the basket to the rail, and close basket retainer parts. In this way, you take the
top basket to lower position
16