Changing The Screen Size; To Change Screen Size; To Change The Brightness Of The Non-Display Area - Eizo RadiForce MS231WT User Manual

2-5. Changing the Screen Size

●

To change screen size

If a resolution other than recommended is used, the image displayed in full screen automatically. You can
change the screen size by using <Screen Size> from <Others> menu.
Setting
Auto
FullScreen
Enlarged
Normal
Example: Image size 1024 × 768
FullScreen
(1920×1080)
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Screen Size> from the <Others> menu, and press
The Screen Size menu appears.
3. Select "Auto", "Full Screen," "Enlarged," or "Normal" with
4. Press
Attention
• Selecting "Normal" may make some color gradations unavailable for display.
●

To change the brightness of the non-display area

A border (black area with no image) around the image appears in the "Normal" or "Enlarged" mode.
Procedure
1. Choose <Others> from the Adjustment menu, and press
2. Choose <Border Intensity> from the <Others> menu, and press
The <Border Intensity> menu appears.
3. Use or
4. Press
26
Chapter2AdjustingScreens
Themonitorautomaticallychangesthescreensizeaccordingtotheaspectratioand
resolutioninformationfromtheexternaldevice.ThiscanbesetonlyforHDMI(SD
Signal)input.
Displaysanimageinfullscreen.Imagesaredistortedinsomecasesbecausethe
verticalrateisnotequaltothehorizontalrate.
Displaysanimageinfullscreen.Insomecases,ablankhorizontalorverticalborder
appearstoequalizetheverticalrateandthehorizontalrate.
Displaysimageswiththespecifiedresolution.
to exit the adjustment.
for adjustment.
to exit the adjustment.
Function
Enlarged
(1440×1080)
.
.
or .
Border
.
Normal
(1024×768)
.